top of page
SLATE GREY / QUARTZ ZINC DOWNPIPES
We are currently producing our pre-aged dark Grey Quartz Zinc downpipes and components as standard in 80mm. However 100mm round and 80mm square can be made to order. We produce using VM Zinc Quartz and elZinc Slate Grey coil meaning our guttering systems will match your roofing or cladding as well as most other manufacturers such as Rheinzink.
Our downpipes are supplied in 2.4m lengths and are available with a range of components including downpipe clips, bends, shoes and water butt diverters. Downpipe clips are produced in Stainless Steel for strength.
Download our price list and brochure >
Please note that the product design can be changed at any time and may be slightly different to the images below.
80mm Round Downpipe
Downpipe
Spigot
Connector (for cut sections only)
40° Bend x 2 for 80mm offset
Use two bends together to create an offset of 80mm.
72° Bend x 2 for 180mm offset
Use two bends together to create an offset of 180mm.
85° Bend x 2 for 210mm offset
Use two bends together to create an offset of 210mm.
Swan Neck Kit
2 x 72° bends with a 300mm section, which can be cut down for a smaller offset if required.
72° Branch
Use a 72° bend with our branch.
Downpipe Clip
bottom of page